What Is A Clean Water Submersible Pump?

The clean water submersible pump is made of 304 stainless steel, which has good corrosion resistance when transporting cold water containing a small amount of chloride. Also suitable for slightly alkaline water, demineralized water, 316 stainless steel and Viton pumps are suitable for highly corrosive liquids.

working conditions

Thin, clean, non-corrosive liquid free of solid particles or fibers

·Liquid temperature: up to +35°C

· Maximum working pressure: 30 bar

·pH value: 6.5~8.5

·The maximum diving depth is not more than 50 meters

scope of use

·This system is suitable for circulation and pressurization of clean water and softened water.

·This series is made of 304 stainless steel, which has good corrosion resistance when transporting cold water containing a small amount of chloride. Also suitable for slightly alkaline water, demineralized water, 316 stainless steel and Viton pumps are suitable for highly corrosive liquids.

curve condition

·Curve tolerance complies with ISO9906, appendix A

·All curves are based on the measured value of 3×380V, 50Hz, 2850r/min.

All measurements are carried out with gas-free water at a temperature of 20°C. The curve is suitable for a kinematic viscosity of 1mm2/s. When the density of the liquid delivered by the pump is higher than that of water, a motor with a higher output power must be used accordingly.

·The thick line part of the curve indicates the recommended performance range.

• Performance curves include possible losses such as check valves.

Taizhou Werto Mechanical & Electrical Co., Ltd. is a professional Submersible Pump Manufacturers. If you need it, you can click the official website to contact us. We are willing to answer more information services for you.